1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mimas V2 Configuration GUI

Discussion in 'FPGA Boards' started by Ivan de Jesus Deras, Jun 25, 2017.

  1. Ivan de Jesus Deras

    Ivan de Jesus Deras New Member

    Joined:
    Jun 25, 2017
    Messages:
    4
    Likes Received:
    2
    Trophy Points:
    3
    Gender:
    Male
    Location:
    Honduras
    Hi everyone,

    Recently after acquiring some Mimas V2 Boards I decided to write a GUI programming tool that works on Linux. I based my work on the python script provided by Numato.

    So if you want to try it, you'll need the following:
    1. Java 1.8 at least.
    2. Linux or Windows (may work on Mac OS, but I didn't tested it).
    3. ZIP file with the tool (see attached file), uncompress it and run the jar file.

    Notes: I tested the tool with the original Firmware at 19200 bps, and it works. Also tested it with the upgraded firmware provided it the forum, using a speed of 115200 bps and it works.
    Regarding the source code I would like to release it as open source, but I'm not sure about the license, as I said before I based my work on the python script provided by Numato. Perhaps someone at Numato can help with this.

    You can see a screenshot here.

    Just in case here is a alternative link to download the application.

    Regards,
    Ivan
     

    Attached Files:

    rohith likes this.
  2. admin

    admin Administrator Staff Member

    Joined:
    Jan 23, 2015
    Messages:
    169
    Likes Received:
    10
    Trophy Points:
    18
    Hi Ivan,

    Thanks for sharing this tool with the community and I apologize for delayed response. I personally believe the community will benefit best with permissive licenses such as MIT or BSD. Both are great options. I would encourage you to read them and make a decision (the text is pretty short in both cases).

    Just adding a screenshot of the tool below so others can get a glimpse without downloading.

    Thanks,
    Tom
    Numato Lab

    Mimasv2JavaConfigurationTool.png
     
    rohith likes this.
  3. Ivan de Jesus Deras

    Ivan de Jesus Deras New Member

    Joined:
    Jun 25, 2017
    Messages:
    4
    Likes Received:
    2
    Trophy Points:
    3
    Gender:
    Male
    Location:
    Honduras
    Hi Tom,

    I think I'll go with the BSD license. I'll upload the the source code to GitHub and I'll let you know when it's available.

    Regards,
    Ivan
     
  4. Ivan de Jesus Deras

    Ivan de Jesus Deras New Member

    Joined:
    Jun 25, 2017
    Messages:
    4
    Likes Received:
    2
    Trophy Points:
    3
    Gender:
    Male
    Location:
    Honduras

Share This Page