1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mimas V2 Spartan 6 FPGA flash memory issue

Discussion in 'FPGA Boards' started by Ravf, Dec 27, 2017.

  1. Ravf

    Ravf New Member

    Joined:
    Dec 27, 2017
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    Location:
    AS
    Hello

    I recently bought the FPGA Mimas V2 Spartan 6 FPGA Development Board with DDR SDRAM.

    I'm working with xilinx ise 14.7, verilog code, when loading the binary file generated by xilinx in the fpga with tool conmimasv2_configuration_tool_windows.exe the fpga stopped responding, ¿is there any way to reset the flash memory?

    windows recognizes the port used by the fpga but does not allow its communication with the.

    https://numato.com/product/mimas-v2-spartan-6-fpga-development-board-with-ddr-sdram#
    https://productdata.numato.com/assets/downloads/fpga/mimasv2/mimasv2_configuration_tool_windows.exe
     
  2. Ravf

    Ravf New Member

    Joined:
    Dec 27, 2017
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    Location:
    AS
    test with sample file
    conmimasv2_configuration_tool_windows.exe log

    Code:
    Supported Boards:
    Mimas V2(XC6SLX Series)
    
    File selected "mimasv2_sample_bin_file.bin"
    Configuration download started...
    Unable to open selected port...
    
    the communication is from usb (PC) to mini usb (FPGA)
    but windows 10 recognizes the fpga on the COM15 port
    the fpga does not turn on the blue light, only the led display and no respond
     
    Last edited: Dec 27, 2017

Share This Page