Great, tnx for fixes :)
You are welcome.
If you manage to get to Erase, just try again if it can detect and erase flash it could continue to flashing, it is next step ...
As I know you do not need anything else, Ubuntu should be the same as debian, you can try
sudo python3 config.py /dev/ttyACM0...
I have tried SuperH but with 115200 numato firmware and it is working nice.
I use linux screen program to connect to the board.
If you using...
python3 config.py /dev/ttyACM0 mimasv2_sample_bin_file.bin
It is not necessary to change firmware from 19200 to 115200, default version (from site) is working on 19200 you can contact them how to do all...
Thanks to the guys from http://j-core.org/ project we got linux running on MimasV2
Now it runs on 19200 and on 115200 firmware
It would be great...
You can use some JTAG uploader that could be fast ...
Well I use it all the time, and it is ok.
Sometimes I get message SPI error or something like this but after reconnecting numato all works.
i do not have the board :(
I run debian
you could try
on linux after inserting USB you will see there what device will be set
There is 115200 firmware for Mimas, check FPGArduino posts and you will find it, you will just need to change baud rate in python uploader on linux
Great blog it is all understandable now, and tnx for credit
At home I have few coinselector it would be great to use it for this game :)
Implemented edge detection and fixed original picture
Is working it would be great to have expansion module
I still cannot get better picture, but it is probably possible......
Today Alexander and me manage to get HDMI from numato on numato sample and finally on FPGArduino it was my mistake because I have generate bad...
Separate names with a comma.